Overview of OSC messages to and from VPT 6
VPT main page
OSC messages to VPT (default receiving port: 6666)
osc	value	description
/moviesource101 (->108)		access moviesources 101-108
../video	string	name of video file
../rate	float	1. is normal rate, - is backwards
../trig	trig	trig video to start from the beginning
../scrub	0. -> 1.	scrub through video frames
../in	0. -> 1.	loop inpoint
../out	0. -> 1.	loop outpoint
../loop	0-3	0:off,1:loop,2:loop backnforth,3:play once
../loopreset	trig	reset loop points
../loopreport	0 or 1	report when video reaches end of loop
../unique	0 or 1	0:still image, 1:video
../unirefr	integer (33->)	refresh rate of still image in milliseconds
../argb	0 or 1	0:source with alpha, 1: no alpha (default)
../start	trig
../stop	trig
../dim	0-12	0:adapt 1-12: check dropmenu in sourcecontrol
../vol	0. -> 1.
../pan	0. -> 1.
../clipnr	0->	0:off, 1-> clipnr in dropmenu of the source
../random	trig	select random clip from source folder
../last	trig	select last clip in source folder
../autostart	0 or 1	start clip when loaded or not
../refreshfolder	trig	checks sourcefolder for new content
../jitmovie	max message	communicate directly with the jit.qt.movie object
/layer1(->32)		access layer 1-32 (or 16)
/activelayer		access active layer
../fade	0. -> 1.
../pos_x	float
../pos_y	float
../scale_x	float
../scale_y	float
../x1 (->4)	float	x cornerpin values of layer
../y1 (->4)	float	y cornerpin values of layer
../red	0. -> 1.
../green	0. -> 1.
../blue	0. -> 1.
../color	255 255 255	rgb in 0-255 range
../txtile		access tile texture settings of layer
../../on	0 or 1
../../txtilex	0-14	check tile dropmenu in navigator::texture tab
../../txtiley	0-15	check tile dropmenu in navigator::texture tab
../txflip		acces flip texture settings of layer
../../on	0 or 1
../../txflip	0-3	normal, flip hor, flip ver, flip hor-ver
../avig		access circular alphamask settings of layer
../../on	0 or 1
../../radius	0. -> 0.5	size of circle
../../fade	0. -> 0.5	softness of edge
../../x	float	x position of circle
../../y	float	y position of circle
../edge		access edgemask settings of layer
../../on	0 or 1
../../edge1	0. -> 1.
../../edge2	0. -> 1.
../../edge3	0. -> 1.
../../edge4	0. -> 1.
../../inv	0 or 1
../mask		access settings for saved masks
../../on	0 or 1
../../source	string	name of maskfile
../solo	0 or 1	set solo status of layer
../solotrig	trig	only show current layer
../blendmode	"=,+,x"	normal, additive,multiply
../source	string	name of source (check dropmenu in layer)
../sourcenr	0->	0 off, 1-> check dropmenu for sources in layer
../cpreset	trig	reset cornerpin values
../name	string	layer name
../videoplane	max message	direct to jit.gl.mesh or jit.gl.nurbs
../cornermesh	0 or 1	0: cornerpin 1:meshwarp
/mixer1 (->8)		access to mixer modules
../A	0->	A source dropmenu
../B	0->	B source dropmenu
../out	0->	destination dropmenu
../mix	0. -> 1.	mix level
../mixtype	0->	mixtype dropmenu
/lfo1 (->6)		access to lfo modules
../on	0 or 1
../phase	0. - 1.
../speed	float	1. is normal speed
../wave	0 - 3	sine,ramp, triangle,square
../wnormal	0 or 1	normal or inverted wave
../val	0. -> 1.	center value of wave
../range	0. -> 1.	range of wave
/lfo7 (->10)		access to lfo mix modules
../lfomix	0. -> 1.	mix level between two lfo sources in lfomix
../val	0. -> 1.	center value of wave
../range	0. -> 1.	range of wave
/lfomaster	0 or 1	activate lfo engine
/buffer
../source	0-2	0 off, 1 109source, 2 110source
../fill	0 or 1	fill buffer when 1, stop when 0
../play	0 or 1	play when 1, stop when 0
../dir	0-2	up,down, up&down
../speed	0. -> 1.
../range	min max: 2 floats 0. -> 1.
../frame	0. -> 1.	scrub relative position in buffer
/fx1 (->6)		access effect modules
../blur	0 or 1	turn blur on/off
../blurlevel	float	blur level
../mblur	0 or 1	turn motion blur on/off
../mblurlevel	float	motion blur level
../brcosa	0 or 1	turn brightness/contrast/saturation on/off
../br	float	brightness
../co	float	contrast
../sa	float	saturation
../scalebias	0 or 1	turn scalebias on/off
../scale_r	float
../scale_g	float
../scale_b	float
../bias_r	float
../bias_g	float
../bias_b	float
../in	0 ->	select source from dropmenu
../out	0 ->	select destination from dropmenu
/osc		access osc out module
../next	trig	goto next line in list of osc commands
../line	0->	goto specified line in osc list
../text	osc formatted message	write a osc message directly
/noise1 (->2)		access noise module
../on	0 or 1
../speed	float
../dimx	int 0 ->	x resolution
../dimy	int 0 ->	y resolution
/preset	0 ->	preset number
/cue	1 ->	cue number
/focus	1-32 (16)	select active layer
/serialout		accesss serialmodule output
../s1 (->8)	0-255	send out the serialport (needs arduino sketch)
/sound
../matrix	0 0 0	column 0-7,row 0-7, value 0-1
../1amp (->8)	0. -> 1.	output level of the specified sound channel
/vpt
../preset	0->	select preset
../cue	1->	select cue
../blackout	trig	blackout
../fullscreen	0 or 1	toggle fullscreen
../renderspeed	2 ->	render framerate, default 33
../previewspeed	2 ->	preview framerate, default 100
../renderbang	trig	trigger a render of current frame
../jump	trig	trigger next frame in active movie sources
../cuenext	trig	next cue
../cueprev	trig	preious cue
../store	trig	store preset
../storenr	0 ->	select preset nr to store to
../storename	string	give the preset a name
../storetype	0-2	store,storenext,storeinsert
../store0	trig	store current values in temporary preset
../presetnext	trig	trigger next preset from preset list
../presetprev	trig	trigger previous preset from preset list
../dimtrig
../router	1 ->	select router preset
../active		include a layer/moviesource in preset playback
../../layer	layernr 0 or 1	pair specifying layer and active on/off
../../moviesource	msourcenr 0 or 1	pair specifying moviesource and active on/off
../opreset	0 ->	used with /presetmix for transitions
../presetmix	0. -> 1.	transition mix between two presets
../checklist	1->	select checklist preset (in prefs section)
../window	max message	communicate directly with jit.window
../render	max message	communicate directyly with jit.gl.render
/adjust		incrementally adjust scale,pos and cornerpin
../posx_up (down)	trig	move x pos 1 step
../posy_up (down)	trig	move y pos 1 step
../scalex_up (down)	trig	increase x scale 1 step
../scaley_up (down)	trig	increase y scale 1 step
../x1_up (1->4, down)	trig	change cornerpin x position (1,2,3 or 4) 1 step
../y1_up (1->4, down)	trig	change cornerpin y position (1,2,3 or 4) 1 step
/live109 (110)		access live module
../on	0 or 1
../jitgrab	max message	direct communication with jit.grab object
/liverec
../rec	trig	turn recording on
../stop	trig	turn recording off
../source	0-2	0 off, 1 109source 2 110source
../rectog	0 or 1	turn rec on/off
/dmxch		access a specific dmx channel
../1 (->32)	0-255	send a dmx value to the specified dmx address
/dmx	1 255	send a pair of values to dmx out
/dmxio	0 or 1	0: dmx in, 1:dmx out
/dmxclose	trig	close dmx connection
/text1		access text module
../on	0 or 1
../message
../font
../size
../align
../posx
../posy
../rotx
../roty
../rotz
../fade
../red
../green
../blue
../layer
../next
../line
../linetempo
OSC messages from VPT (default destination 127.0.0.1 port 6667)
/preset	float	current preset
/cue	1 ->	current cue
/cuetrig	bang	a new cue is triggered
/transitiondone	bang	a transition between two presets completed
/loopreport	moviesourcenr bang	loop report of specified source (requires loopreport activated)
/test	test	a test message